Temporary Floor Protection – A Product Guide

Your floors want particular protection when undergoing remodeling, during new building, moving heavy furniture or equipment, and for other occasions past day-to-day use. Protecting flooring makes sense and saves money. A spill of paint, the drop of a hammer, a scratch from heavy furniture can cost hundreds of dollars in replacement and repair costs. This article describes surface protection products for floors so to make informed selections on one of the best product to use on your needs.

Types of Protection Packaging:

Floor protection products are commonly packaged as either:

(1) Products by the roll: These include frequent adhesive films, rolled paper products and rolled textile protection. Protective supplies purchased by the roll are commonly measured in thickness by mils (e.g., 2.5 mils thick as much as forty eight mils thick).

(2) Products by the sheet: These embrace corrugated plastic, masonite, and different inflexible protection. Protective materials bought by the sheet are commonly measured in thickness by the inch (e.g., 1/4-inch thick) and usually come as 4 ft by eight feet.

Type of Flooring Protection:

Paper

Paper protection is suitable for all hard surfaces and resilient surfaces but doesn’t work well to protect carpets as it can tear when flexing under footsteps. Paper products are breathable so that glue fumes and cement curing vapors can escape. One disadvantage to paper products as they require tapes to safe them to flooring and tapes can typically depart adhesive residue when removed. Common paper protection products embrace:

· Ramboard™ A coated compressed paper board 38 mils thick that is breathable, water-resistant and made from recycled paper.

· Kraft paper is a lightweight brown paper that’s inexpensive however doesn’t afford any impact protection and can easily tear

· Scrim paper may incorporate coatings or reinforcements to make them water-proof as well as scrim threads to bolster the paper and prevent tearing. These improved papers are longer lasting than common Kraft paper or rosin paper nevertheless they are also too thin to offer a lot impact protection.

· Rosin paper is thicker than Kraft paper and could be very low cost. Rosin paper is recycled, felt paper that ranges from 9.0 to 11.5 mils thick. The massive drawback of using Rosin paper is that it might cause a everlasting stain if the paper gets wet. Rosin paper also can rip simply so it not usually beneficial to be used

· Corrugated cardboard rolls or sheets may also be used to protect flooring. Corrugate provides impact protection however it just isn’t coated with a waterproof end and must be kept dry at all times so that it doesn’t disintegrate. Cardboard products are also available as single-, double-, and triple-walled corrugated cardboard sheets or as a fan-folded stack.

Polyethylene Film

Polyethylene (PE) films are sold as self adhesive rolled films varying from 2.0 up to 3.5 mils in thickness. They trap any moisture from escaping in order that they shouldn’t be used on any floors that are curing. Two of the good benefits of polyethylene films are that films will flex and contour so they can be used on carpets as well as hard surfaces. These films don’t supply any impact protection and are usually rated for short time period use of 30 to ninety days only. Polyethylene films are designed for one-time use and do not use recycled materials making them a poor alternative in sustainable protection. Protection films are available in quite a lot of adhesion “tack”. Hard surface protection films could have a decrease tack and shade than carpet protection which needs a more aggressive glue to hold onto carpet fibers successfully.

Wood Products

Plywood and Masonite are commonly used as protection on commercial projects with lots of foot traffic. Masonite is a wood product made from wood fibers unlike plywood which is an precise sheet of thin wood. Both plywood and Masonite are sold in the standard size of four toes by eight feet and are more expensive per square foot than paper or polyethylene products. Masonite is commonly 1/8 or 1/4 inch thick. Plywood is commonly 1/four inch to three/four inch thick. Each products provide impact protection on a wide range of floor types and provide adequate protection towards heavy equipment use or furniture moving. Each plywood and Masonite are breathable and reusable nevertheless they are bulky to hold and store. These wood sheets ought to be used on top of a softer protection corresponding to a rolled textile as they easily scratch flooring. These sheets work well to protect carpet as they prevent wrinkles when rolling heavy loads over the carpet. Plywood and Masonite do not offer moisture protection and could be harder to chop to dimension than other protection types.

If you are you looking for more regarding temporary carpet protection take a look at our own web page.

Leave a Reply

Your email address will not be published. Required fields are marked *