Non permanent Floor Protection – A Product Guide

Your floors need special protection when undergoing remodeling, during new building, moving heavy furniture or equipment, and for different events past day-to-day use. Protecting flooring makes sense and saves money. A spill of paint, the drop of a hammer, a scratch from heavy furniture can price 1000’s of dollars in replacement and repair costs. This article describes surface protection products for floors so that you could make informed choices on the best product to make use of on your needs.

Types of Protection Packaging:

Floor protection products are commonly packaged as either:

(1) Products by the roll: These include widespread adhesive films, rolled paper products and rolled textile protection. Protective materials bought by the roll are commonly measured in thickness by mils (e.g., 2.5 mils thick up to 48 mils thick).

(2) Products by the sheet: These include corrugated plastic, masonite, and other rigid protection. Protective materials purchased by the sheet are commonly measured in thickness by the inch (e.g., 1/4-inch thick) and usually come as four feet by eight feet.

Type of Flooring Protection:

Paper

Paper protection is suitable for all hard surfaces and resilient surfaces but doesn’t work well to protect carpets as it can tear when flexing under footsteps. Paper products are breathable in order that glue fumes and cement curing vapors can escape. One disadvantage to paper products as they require tapes to secure them to flooring and tapes can often go away adhesive residue when removed. Common paper protection products embrace:

· Ramboard™ A coated compressed paper board 38 mils thick that’s breathable, water-resistant and made from recycled paper.

· Kraft paper is a lightweight brown paper that is inexpensive but does not afford any impact protection and can easily tear

· Scrim paper could incorporate coatings or reinforcements to make them water resistant as well as scrim threads to bolster the paper and forestall tearing. These improved papers are longer lasting than regular Kraft paper or rosin paper nevertheless they are additionally too thin to supply much impact protection.

· Rosin paper is thicker than Kraft paper and could be very low cost. Rosin paper is recycled, felt paper that ranges from 9.0 to 11.5 mils thick. The massive drawback of using Rosin paper is that it might cause a everlasting stain if the paper gets wet. Rosin paper may also rip simply so it not usually beneficial to be used

· Corrugated cardboard rolls or sheets can be used to protect flooring. Corrugate provides impact protection nonetheless it is not coated with a water resistant end and ought to be kept dry at all times so that it doesn’t disintegrate. Cardboard products are additionally available as single-, double-, and triple-walled corrugated cardboard sheets or as a fan-folded stack.

Polyethylene Film

Polyethylene (PE) films are sold as self adhesive rolled films various from 2.0 as much as 3.5 mils in thickness. They trap any moisture from escaping so they should not be used on any floors which might be curing. Two of the great benefits of polyethylene films are that films will flex and contour so they can be used on carpets as well as hard surfaces. These films don’t provide any impact protection and are normally rated for short term use of 30 to 90 days only. Polyethylene films are designed for one-time use and don’t use recycled supplies making them a poor alternative in sustainable protection. Protection films are available in a wide range of adhesion “tack”. Hard surface protection films could have a lower tack and color than carpet protection which wants a more aggressive glue to hold onto carpet fibers successfully.

Wood Products

Plywood and Masonite are commonly used as protection on commercial projects with plenty of foot traffic. Masonite is a wood product made from wood fibers unlike plywood which is an precise sheet of thin wood. Both plywood and Masonite are sold in the usual measurement of four feet by eight ft and are more expensive per square foot than paper or polyethylene products. Masonite is commonly 1/8 or 1/four inch thick. Plywood is commonly 1/4 inch to 3/four inch thick. Each products provide impact protection on a wide range of floor types and provide adequate protection against heavy equipment use or furniture moving. Both plywood and Masonite are breathable and reusable nonetheless they’re bulky to carry and store. These wood sheets should be used on prime of a softer protection reminiscent of a rolled textile as they simply scratch flooring. These sheets work well to protect carpet as they stop wrinkles when rolling heavy loads over the carpet. Plywood and Masonite don’t provide moisture protection and will be harder to cut to dimension than other protection types.

If you’re ready to see more in regards to correx sheets stop by our own site.