Momentary Floor Protection – A Product Guide

Your floors want particular protection when undergoing remodeling, during new building, moving heavy furniture or equipment, and for different events beyond day-to-day use. Protecting flooring makes sense and saves money. A spill of paint, the drop of a hammer, a scratch from heavy furniture can value hundreds of dollars in replacement and repair costs. This article describes surface protection products for floors with the intention to make knowledgeable choices on one of the best product to make use of to your needs.

Types of Protection Packaging:

Floor protection products are commonly packaged as either:

(1) Products by the roll: These embrace frequent adhesive films, rolled paper products and rolled textile protection. Protective supplies bought by the roll are commonly measured in thickness by mils (e.g., 2.5 mils thick as much as forty eight mils thick).

(2) Products by the sheet: These include corrugated plastic, masonite, and other rigid protection. Protective supplies purchased by the sheet are commonly measured in thickness by the inch (e.g., 1/4-inch thick) and usually come as four toes by eight feet.

Type of Flooring Protection:

Paper

Paper protection is suitable for all hard surfaces and resilient surfaces but doesn’t work well to protect carpets as it can tear when flexing under footsteps. Paper products are breathable so that glue fumes and cement curing vapors can escape. One disadvantage to paper products as they require tapes to safe them to flooring and tapes can usually go away adhesive residue when removed. Common paper protection products include:

· Ramboard™ A coated compressed paper board 38 mils thick that’s breathable, water-resistant and made from recycled paper.

· Kraft paper is a lightweight brown paper that’s inexpensive however does not afford any impact protection and might simply tear

· Scrim paper could incorporate coatings or reinforcements to make them water-resistant as well as scrim threads to bolster the paper and stop tearing. These improved papers are longer lasting than regular Kraft paper or rosin paper however they’re also too thin to supply a lot impact protection.

· Rosin paper is thicker than Kraft paper and may be very low cost. Rosin paper is recycled, felt paper that ranges from 9.zero to 11.5 mils thick. The massive drawback of using Rosin paper is that it could cause a everlasting stain if the paper gets wet. Rosin paper also can rip easily so it not usually beneficial to be used

· Corrugated cardboard rolls or sheets may also be used to protect flooring. Corrugate provides impact protection nonetheless it just isn’t coated with a water-resistant end and should be kept dry at all times so that it doesn’t disintegrate. Cardboard products are additionally available as single-, double-, and triple-walled corrugated cardboard sheets or as a fan-folded stack.

Polyethylene Film

Polyethylene (PE) films are sold as self adhesive rolled films various from 2.0 as much as 3.5 mils in thickness. They trap any moisture from escaping so they shouldn’t be used on any floors that are curing. Two of the good benefits of polyethylene films are that films will flex and contour so they can be used on carpets as well as hard surfaces. These films don’t supply any impact protection and are usually rated for short term use of 30 to 90 days only. Polyethylene films are designed for one-time use and don’t use recycled supplies making them a poor choice in maintainable protection. Protection films are available in quite a lot of adhesion “tack”. Hard surface protection films can have a decrease tack and shade than carpet protection which wants a more aggressive glue to hold onto carpet fibers successfully.

Wood Products

Plywood and Masonite are commonly used as protection on commercial projects with a lot of foot traffic. Masonite is a wood product made from wood fibers unlike plywood which is an actual sheet of thin wood. Each plywood and Masonite are sold in the standard measurement of 4 ft by eight toes and are more expensive per square foot than paper or polyethylene products. Masonite is commonly 1/8 or 1/4 inch thick. Plywood is commonly 1/four inch to three/four inch thick. Each products provide impact protection on a wide range of floor types and provide adequate protection towards heavy equipment use or furniture moving. Each plywood and Masonite are breathable and reusable however they’re bulky to carry and store. These wood sheets must be used on prime of a softer protection such as a rolled textile as they easily scratch flooring. These sheets work well to protect carpet as they prevent wrinkles when rolling heavy loads over the carpet. Plywood and Masonite do not provide moisture protection and may be harder to cut to dimension than other protection types.

If you liked this write-up and you would like to receive additional information pertaining to temporary floor protection kindly visit the webpage.