Momentary Floor Protection – A Product Guide

Your floors need special protection when undergoing remodeling, throughout new development, moving heavy furniture or equipment, and for other occasions past day-to-day use. Protecting flooring makes sense and saves money. A spill of paint, the drop of a hammer, a scratch from heavy furniture can price 1000’s of dollars in replacement and repair costs. This article describes surface protection products for floors as a way to make informed choices on the best product to use for your needs.

Types of Protection Packaging:

Floor protection products are commonly packaged as either:

(1) Products by the roll: These include widespread adhesive films, rolled paper products and rolled textile protection. Protective materials purchased by the roll are commonly measured in thickness by mils (e.g., 2.5 mils thick up to forty eight mils thick).

(2) Products by the sheet: These embody corrugated plastic, masonite, and other rigid protection. Protective supplies bought by the sheet are commonly measured in thickness by the inch (e.g., 1/four-inch thick) and normally come as 4 ft by 8 feet.

Type of Flooring Protection:

Paper

Paper protection is suitable for all hard surfaces and resilient surfaces but does not work well to protect carpets as it can tear when flexing under footsteps. Paper products are breathable so that glue fumes and cement curing vapors can escape. One disadvantage to paper products as they require tapes to safe them to flooring and tapes can often leave adhesive residue when removed. Widespread paper protection products embody:

· Ramboard™ A coated compressed paper board 38 mils thick that is breathable, water-resistant and made from recycled paper.

· Kraft paper is a lightweight brown paper that is cheap however doesn’t afford any impact protection and may simply tear

· Scrim paper may incorporate coatings or reinforcements to make them waterproof as well as scrim threads to bolster the paper and forestall tearing. These improved papers are longer lasting than common Kraft paper or rosin paper nevertheless they are also too thin to supply much impact protection.

· Rosin paper is thicker than Kraft paper and may be very low cost. Rosin paper is recycled, felt paper that ranges from 9.0 to 11.5 mils thick. The massive drawback of utilizing Rosin paper is that it may cause a permanent stain if the paper gets wet. Rosin paper also can rip simply so it not usually really helpful for use

· Corrugated cardboard rolls or sheets can be used to protect flooring. Corrugate provides impact protection nevertheless it is just not coated with a water resistant finish and ought to be kept dry at all times in order that it does not disintegrate. Cardboard products are also available as single-, double-, and triple-walled corrugated cardboard sheets or as a fan-folded stack.

Polyethylene Film

Polyethylene (PE) films are sold as self adhesive rolled films varying from 2.0 as much as 3.5 mils in thickness. They trap any moisture from escaping so that they should not be used on any floors that are curing. Two of the good benefits of polyethylene films are that films will flex and contour to allow them to be used on carpets as well as hard surfaces. These films don’t supply any impact protection and are usually rated for brief term use of 30 to ninety days only. Polyethylene films are designed for one-time use and don’t use recycled supplies making them a poor selection in sustainable protection. Protection films are available in quite a lot of adhesion “tack”. Hard surface protection films will have a decrease tack and shade than carpet protection which wants a more aggressive glue to hold onto carpet fibers successfully.

Wood Products

Plywood and Masonite are commonly used as protection on commercial projects with a number of foot traffic. Masonite is a wood product made from wood fibers unlike plywood which is an actual sheet of thin wood. Each plywood and Masonite are sold in the standard dimension of 4 ft by eight toes and are more costly per sq. foot than paper or polyethylene products. Masonite is commonly 1/eight or 1/four inch thick. Plywood is commonly 1/four inch to three/4 inch thick. Both products provide impact protection on a variety of floor types and provide adequate protection in opposition to heavy equipment use or furniture moving. Each plywood and Masonite are breathable and reusable nevertheless they’re bulky to hold and store. These wood sheets ought to be used on top of a softer protection corresponding to a rolled textile as they easily scratch flooring. These sheets work well to protect carpet as they stop wrinkles when rolling heavy loads over the carpet. Plywood and Masonite do not provide moisture protection and can be harder to chop to dimension than different protection types.

If you cherished this report and you would like to acquire far more information concerning correx sheets kindly stop by the web-site.

Leave a Reply

Your email address will not be published. Required fields are marked *