Easy methods to Refinish Laminate Cabinets

Many people assume laminate cabinets cannot be refinished, however this is way from the reality! There isn’t any want to switch laminate cabinets because they’re old or outdated. Instead, you’ll be able to simply refinish them! Immediately brighten, modernize, and alter the look of your kitchen’s laminate cabinetry all within your budget. You will need to assessment the correct process for laminate cabinet refinishing with a view to achieve the absolute best results. For these uncomfortable with do-it-yourself helpful work, there’s no want to fret; you may hire a professional contractor and still stay within price range! Proceed reading for a quick guideline to refinishing laminate kitchen cabinets, and who to call for professional basic contractor work for kitchen remodeling in your town!

Laminate Kitchen Cabinets

In case you are determined to refinish your kitchen laminate cabinets on your own, then good for you! Take a look at the guide under to be taught a number of the main parts and key points for these particular projects. You should definitely prepare by first gathering all the mandatory supplies and instruments to get the job accomplished right. These embody:

Paint and Paint Primer (Water-Based mostly)
Foam Rollers
Rolling Pans
Painter’s Tape
Sandpaper (240 & 150 Grit Sheets)
Old Bed Sheets or Drop Cloths
Disinfectant Spray
Clean Rags
Microfiber Cloth
Permanent Marker
Screwdriver
For a fair more up to date look, you should purchase and set up new, more fashionable-looking cabinet handles. These are available for a variety of designs and prices at any hardware or dwelling store. If any laminate is peeling or cracking, it will must be replaced entirely. Do not proceed to refinish peeling or cracked laminate cabinetry. Nevertheless, if it is only slightly peeling in one corner or so, you can simply sand the exposed area behind the laminate, and then re-glue it utilizing a water-proof adhesive. Use masking tape to hold it in place while it dries. This works best for small areas and corners. After you have amassed all the instruments and provides you need, you are ready to get started.

This is how:

First clean the entire cabinets. Mud them with the microfiber material to remove solids, and then follow with an intensive wipe down using the disinfectant spray. This provides stronger primer adhesion and ensures a cleaner smoother finish.

Using the screwdriver, remove every cabinet face and its deal with while keeping track of where each goes. Use the everlasting marker to label each so you will bear in mind the place to exchange it later.

Place the cabinet faces on the drop cloths, making sure the edges stay uncovered and accessible. Make sure the drop cloths cover sufficient surface area to protect the surrounding setting from paint.

Use the painter’s tape to line the inside edges of the cabinet faces to prevent paint drips. Take your time on this step to ensure accuracy.

Use the 240 grit sandpaper sheets to manually sand the cabinet faces. You might select to use a handheld portable sander if you are familiar with its operation. Just you’ll want to not over-sand.

After sanding, use your microfiber material to wipe away the residual mud and sanding debris. Do this thoroughly and remove as a lot mud as possible.

Using your foam roller, apply a coat of water-based paint primer to every cabinet face. Enable this to dry completely, usually eight to 12 hours depending on the brand.

Once the primer is applied and has dried completely, sand each cabinet face once more utilizing the a hundred and fifty grit sandpaper. Remove excess sanding mud with your microfiber cloth afterwards.

Do steps 7 and 8 again.

Once both coats of primer are applied and have dried, it is time to use your water-primarily based paint of alternative utilizing your second foam roller. Be sure to use v-strokes throughout application to promote even paint marks and distribution.

Repeat step 10.

Enable the cabinets to dry for not less than 72 hours earlier than reattaching hardware and reassembling them of their rightful place. This ensures that the paint has dried and hardened completely.

Not a DIY Kind of Particular person? No Problem!

Chances are you’ll select to hire a professional painting contractor instead of tackling this project on our own. In case you are not familiar with helpful work, and have by no means painted earlier than, it will be the wisest choice. And you can still stay within an economical budget whenever you hire professionals for the job.

If you have any type of concerns relating to where and exactly how to utilize Cabinet Refinishing Philadelphia, you could contact us at our page.