Easy methods to Refinish Laminate Cabinets

Many people assume laminate cabinets cannot be refinished, but this is way from the reality! There is no want to interchange laminate cabinets because they are old or outdated. Instead, you may simply refinish them! Instantly brighten, modernize, and alter the look of your kitchen’s laminate cabinetry all within your budget. You will need to evaluate the proper process for laminate cabinet refinishing with a purpose to achieve the very best results. For these uncomfortable with do-it-your self helpful work, there is no need to fret; you’ll be able to hire a professional contractor and nonetheless stay within funds! Continue reading for a brief guideline to refinishing laminate kitchen cabinets, and who to call for professional general contractor work for kitchen remodeling in your town!

Laminate Kitchen Cabinets

If you are determined to refinish your kitchen laminate cabinets on your own, then good for you! Take a look at the guide below to be taught some of the major elements and key factors for these particular projects. Make sure to put together by first gathering all the necessary provides and instruments to get the job performed right. These embrace:

Paint and Paint Primer (Water-Based)
Foam Rollers
Rolling Pans
Painter’s Tape
Sandpaper (240 & a hundred and fifty Grit Sheets)
Old Bed Sheets or Drop Cloths
Disinfectant Spray
Clean Rags
Microfiber Fabric
Everlasting Marker
For a fair more up to date look, you can purchase and install new, more trendy-looking cabinet handles. These are available for a variety of designs and prices at any hardware or dwelling store. If any laminate is peeling or cracking, it will should be changed entirely. Don’t proceed to refinish peeling or cracked laminate cabinetry. Nonetheless, if it is only slightly peeling in a single nook or so, you can simply sand the uncovered area behind the laminate, after which re-glue it using a water-proof adhesive. Use masking tape to hold it in place while it dries. This works finest for small areas and corners. After getting gathered all the instruments and provides you want, you might be ready to get started.

Here is how:

First clean all the cabinets. Mud them with the microfiber cloth to remove solids, after which observe with an intensive wipe down utilizing the disinfectant spray. This provides stronger primer adhesion and ensures a cleaner smoother finish.

Utilizing the screwdriver, remove each cabinet face and its handle while keeping track of the place every one goes. Use the everlasting marker to label every one so you will keep in mind where to exchange it later.

Place the cabinet faces on the drop cloths, making sure the sides stay exposed and accessible. Make sure the drop cloths cover enough surface space to protect the surrounding environment from paint.

Use the painter’s tape to line the inside edges of the cabinet faces to forestall paint drips. Take your time on this step to ensure accuracy.

Use the 240 grit sandpaper sheets to manually sand the cabinet faces. You could choose to use a handheld portable sander if you’re familiar with its operation. Just you’ll want to not over-sand.

After sanding, use your microfiber fabric to wipe away the residual dust and sanding debris. Do this thoroughly and remove as a lot dust as possible.

Utilizing your foam roller, apply a coat of water-primarily based paint primer to every cabinet face. Permit this to dry completely, often 8 to 12 hours relying on the brand.

Once the primer is utilized and has dried fully, sand every cabinet face again using the 150 grit sandpaper. Remove extra sanding mud with your microfiber material afterwards.

Do steps 7 and eight again.

Once each coats of primer are applied and have dried, it is time to apply your water-based paint of selection utilizing your second foam roller. Make sure to use v-strokes throughout application to promote even paint marks and distribution.

Repeat step 10.

Allow the cabinets to dry for no less than seventy two hours before reattaching hardware and reassembling them of their rightful place. This ensures that the paint has dried and hardened completely.

Not a DIY Kind of Particular person? No Problem!

Chances are you’ll choose to hire a professional painting contractor instead of tackling this project on our own. If you’re not acquainted with helpful work, and have by no means painted earlier than, it will be the wisest choice. And you’ll still stay within a cheap finances once you hire professionals for the job.

If you treasured this article and you simply would like to acquire more info concerning Kitchen cabinet refinishing please visit our web-site.